Specifications

9030368 E9 Device View
2-29
EFDMIM Device View
Clearing Duplicate EFDMIM Address Alarms
Changing MIM Representations Using the Mouse
To change the MIM representation of the EFDMIM, using the mouse, follow
these steps:
1. Move the mouse pointer onto the EFDMIM.
2. Double-click the left mouse button.
3. The EFDMIM changes its representation. A selected single MIM appears
to extend from the hub chassis.
Clearing Duplicate EFDMIM Address Alarms
If you have previously created a stand alone EFDMIM icon and have created
an IRM or IRBM hub icon and configured the EFDMIM installed in that hub
through the hub Device View, a duplicate address alarm condition (yellow
alarm) now exists in the hub icon containing the EFDMIM or the stand alone
EFDMIM icon. This occurs because SPECTRUM views the independent
EFDMIM icon and the EFDMIM installed in the hub icon as separate devices
with the same assigned IP address. To alleviate this alarm condition, you
must clear the duplicate alarm.
NOTE
You must start in physical representation to use this toggle feature.
NOTE
Make sure that the mouse pointer is not on top of or next to a gauge or port
connector, otherwise a Port Performance View will open.
NOTE
Although yellow alarm conditions are minor alerts, Cabletron Systems
recommends clearing these alarms when they occur.