Specifications

9030368 E9 Device View
2-25
EFDMIM Device View
Configuring the EFDMIM in an IRM or IRBM Device View
Figure 2-10. The MMAC Device Statistics Panel
Configuring the EFDMIM in an IRM or IRBM Device View
To receive EFDMIM gauge and port information in the IRM or IRBM Device
View logical representation and for the EFDMIM LEDs to appear “live” in the
IRM or IRBM Device View physical representation, you must assign an IP
address to the EFDMIM installed in the hub chassis as follows:
1. Move the mouse pointer onto the EFDMIM. Single-click the left mouse
button to highlight the EFDMIM.
2. Select Icon Subviews from the View menu.
3. Select MIM Configuration View from the Icon Subviews menu to access
the EFDMIM Configuration View.
4. Select Edit from the File menu in the EFDMIM Configuration View.
5. Enter the IP address of the EFDMIM device. If you have already created
the EFDMIM as a stand alone icon, enter the same IP address here.
90
MMAC Device Statistics
Frame Rate
Collision Rate
Fri Jan 31 08:05:19 1996
1000
800
600
400
200
0
00:3:00:6:00:9:0
0
Lin
Logical Gauges
Frames
Gauge Mode
Percentage
NOTE
Cabletron recommends assigning a unique model name to the EFDMIM
installed in the hub chassis to easily differentiate it from an independent
EFDMIM icon (Bdg_CSI_EFDMIM) with the same assigned IP address.