Specifications

EFDMIM Device View
EFDMIM Logical MIM Representation
Device View
2-16
Cabletron SNMP Bridges
Management Module Guide
Figure 2-6. The IRM2, IRBM, or IRM3 MMAC Device Panel
EFDMIM Logical MIM Representation
The EFDMIM logical representation provides gauge and port information
about the EFDMIM installed in the Cabletron hub instead of presenting a
physical image. For information on a Device View physical MIM
representation, refer to the section titled “EFDMIM Physical MIM
Representation.” Refer to the section titled “Changing MIM Representations”
for information on changing between logical and physical MIM
representations. Figure 2-7 shows an example of a logical MIM
representation.
An EFDMIM logical representation provides the following information about
the board and the ports on the board:
Board Name
The name of the EFDMIM.
Port Number
The number of the port.
Port Status
The current status of the port. The port status conditions are as follows:
STATUS COLOR CODE
NLNK (No Link) Yellow
ON Green
OFF Blue
SEG (Segmented) Red
Two buttons are available from the MMAC Device Panel to change the
statistical selections.
MMAC Device Panel
My Office
Location
Name
IRBM Hub
Logical Gauges
Frames
Gauge Mode
Percentage
Network Address
Device Type
System UpTime
132.177.118.24
Hub_CSI_IRBM
2+01:17:39