Specifications

9030368 E9 Event and Alarm Messages
7-1
Chapter 7
Event and Alarm Messages
What is in this Chapter
This chapter describes the events and alarms that Cabletron SNMP Bridge
devices generate. Additionally, this appendix notes if an event is mapped to an
identical alarm message, and provides any probable cause messages
corresponding to these alarms.
The events and alarms generated by the model type designations listed below
are described in the sections that follow:
• SNMP NB20E
• SNMP NB25E
• NB30
Events and alarms originate as generic Simple Network Management
Protocol (SNMP) traps sent from the physical bridge device. SPECTRUM
translates these traps, or unsolicited messages, as events and displays them
in the Event Log. The EFDMIMdoes not support traps. For more information
on specific traps generated by each device, refer to RFC 1213 available
through the Internet system. Also refer to the Management Information Base
(MIB) documentation for each specific bridge device.
NOTE
Each event/alarm listed below includes: the event code, the event/alarm
message, followed by a brief description of the event/alarm, an alarm
mapping indicator, and any probable cause message for the mapped alarm.
When variable data is inserted in a message, it is indicated by a {v}. Data in
parenthesis will be replaced by the named variable followed by a specific
value, without the parenthesis.
Management Module Guide for the Cabletron Systems SNMP Bridges