User`s guide

Chapter 4: Local Management
Page 4-26 IRM3 User’s Guide
4.8.2 Token Ring Board Status Screen Fields
The following explains each field on the Token Ring Board Status screen.
Date
Displays the date to which the internal clock of the IRM3 is set.
Time
Displays the time, in a 24 hour format, to which the internal clock of the
IRM3 is set.
Device Name
Displays the name assigned to the device. The default name is IRM3.
Board Name
Displays the name assigned to the Token Ring board. The default name is
Board # (# = slot number).
Slot Number
MMAC slot number where the Token Ring Board is located.
Board Type
Displays the Cabletron Systems model name of the board.
Port Status
Displays the current status of each station port on the Token Ring board.
This field is blank if you have selected a Token Ring board without station
ports. The following are the possible status conditions for each station
port (also refer to Table 4-1 for status conditions displayed for each
station port configuration):
• ENB (Enable)
Indicates that the station port is enabled. There is not a station attached
to the port.
• BYP (Bypass)
Indicates that the station port is bypassed. The station port is disabled.
Disabling a port makes insertion impossible.
• LNK (Link)
Indicates that the station port is disabled and the attached station is
operational.