User`s guide

The Setup Screen
IRM3 User’s Guide Page 4-21
4.6.4 Setting the Set Current Date Option
To use the Set Current Date option, perform the following steps:
1. Using the arrow keys, highlight the Set Current Date field.
2. Enter the date into the field in a mm/dd/yy format.
3. Press RETURN. If an illegal date was entered in step 2, the error
message “Illegal Information Entered” appears on the screen.
4. Using the arrow keys, highlight the SAVE SETUP option at the
bottom of the Setup screen.
5. Press RETURN. The message “Modified screen Information Has
Been Saved!” appears on the screen.
4.6.5 Setting the Set Current Time Option
To set the Set Current Time option, perform the following steps:
1. Using the arrow keys, highlight the Set Current Time field.
2. Enter the time into the field in an hh:mm:ss format. Note that the time
is recorded in 24 hour format.
3. Press RETURN. If an illegal time was entered in step 2, the error
message “Illegal Information Entered” appears on the screen.
4. Using the arrow keys, highlight the SAVE SETUP option at the
bottom of the Setup screen.
5. Press RETURN. The message “Modified screen Information Has
Been Saved!” appears on the screen.
4.6.6 Setting the Device Lock Option
When the Device Lock Option is enabled, new source addresses cannot
access the IRM3 through the station port (a point to point port).
To set the Device Lock option perform the following steps:
1. Using the arrow keys, highlight the Set Device Lock field.
2. Press the RETURN key to toggle between the LOCKED and
UNLOCKED options.