User`s guide

Chapter 4: Local Management
Page 4-10 IRM3 User’s Guide
2. Press RETURN. The IRM3 SNMP Local Management introductory
screen, shown in Figure 4-2, appears on the terminal.
3. Press RETURN. The Device/Board/Port Counters screen (Main),
shown in Figure 4-4, appears. Refer to Section 4.4 for more
information regarding this screen.
Local Management for the IRM3 is now ready for operation.
4.4 THE DEVICE/BOARD/PORT COUNTERS SCREEN
The Device/Board/Port Counters screen shown in Figure 4-4 of Local
Management for the IRM3 allows you to quickly scan statistical
information concerning the network traffic passing through the MMAC,
boards, and ports. You can see the number of bytes received, the total
number of packets, the total number of receive and transmit collisions,
and the number of errors.
Figure 4-4 IRM3 Device/Board/Port Counters Screen
11/15/91 14:26:43
DEVICE/BOARD/PORT COUNTERS
Device Name: IRM3 00-00-1d-00-39-14
134.141.52.48
Ethernet Address:
IP Address:
Bytes Received:
Packets:
Errors:
Receive Collisions:
Transmit Collisions:
Out of Window Collisions:
Runt Packets:
No Resources Available:
Frame Alignment Errors:
CRC Errors:
Giant Packets
Port Admin. Status: ON
42598357
142314
14
1
0
0
0
1
0
2
2
Device
42586292
141995
14
1
0
0
0
1
0
2
2
Port 1
42598794
142336
14
1
0
0
0
1
0
2
2
BOARD 1 PORT 1 RESET COUNTERS
COMMUNITY NAMESEXIT
SETUP ENABLE BOARD ENABLE PORT DISABLE PORT
PORT ASSOCIATION
TOKEN RING BOARD 3
Port Seg. Status: ON
Board 1
DISABLE BOARD
0494114