Specifications

9031035 E4 Hub Applications
5-3
Card + Hub App
Access/One Card Configuration View
Reset Action
When this internet object is SET to a value of requested, Reset All Cards, or
ForceLoad, the hub resets, according to the specific request. Resetting locally
sets the value of this internet object to not-requested. Initially its value is not-
requested. The values for the hub reset action are listed in Table 5-2.
Serial Number
Indicates this Ungermann Bass hub’s serial number.
Air Flow Status
Indicates normal airflow inside the enclosure. Applies only to enclosures with
an Air Flow Sensor (AFS) installed and a supervisor capable of detecting the
signal from this sensor (currently only the ASM-710 and ASM-760). Values
are n/a for not applicable, normal airflow, and abnormal airflow.
Poll Time
The time in tenths of seconds between polls of hub cards by the supervisor.
Hub Type
The number of slots in the enclosure, followed by the type of hub enclosure.
Access/One Card Configuration View
This view provides the card’s configuration information in table format. Each
row selection in the Board Table provides the card’s relative position in the
enclosure starting at 1. You may open the view by completing one of the
following steps:
• Select UB Card Config from the UBHubApp Icon
Subviews menu
• Using the right mouse button, click on the UBHubApp
icon and select Card Config from the View Icon
Subviews menu
• Highlight the UBHubApp icon and click Card Config
from the View Icon Subviews menu.
The view fields for this view are described below:
Table 5-2. Hub Reset Values
Hub Reset Action Value Description
Not Requested Not Requested.
Reset All Cards Reset all except Supervisor.
Force Load Load zero slot enclosure.