Specifications

9031035 E4 Ethernet Applications
4-7
Ethernet Applications
Ethernet Extended Port View
You can open the Extended Port Configuration View by:
• selecting Ext Port Config from the Basic Ether icon
Subviews menu
• highlighting the Basic Ether Icon, clicking the middle
mouse button upon the icon to view the icon subviews
menu, and selecting Ext Port Config
• selecting Port Config from the Basic Ether Icon
Subviews menu and clicking the Extended Port Config
button.
The view and its fields are described below:
Model Name
Provides the application name.
Extended Port Table
This portion of the view displays the Extended Port Table.
Slot
The relative slot number in an enclosure starting with 1.
Port
The relative position of a port within a card starting with 1. The AUI port
identifier is 13.
Auto Partition
Indicates whether a port has been automatically partitioned by the hub’s
auto-partition protection; this happens if a port signals continuous collision or
there are greater than 30 consectutive collisions on the port.
Senses
The number of times carrier sense was on when sampled every 10
milliseconds.
Custom Cnt#
A counter that is incremented by one of the following occurences on this port:
collision, late collision, carrier too long, bad bit rate, missing SFD, short event,
non-collided packet, or auto partition.
Ext Length Media
The administrative state of the 10BaseT link integrity function. When locked,
the port functions like an ASP-300. Note that this does not apply to an AUI
port.