Specifications

Ungermann Bass Hub Events and Alarms
Event and Alarm Messages Ungermann Bass Hub
9-4 Management Module Guide
001b0022
Access/One hub model {m}: The fan on the
module in slot {I 1} is defective: its status has
changed to abnormal.
001b0022
Hardware failure of fan.
001b0023
Access/One hub model {m}: The ring
containing card {I 1} has begun the beacon
detect process: its status has changed to
beacon DetectInProgress.
001b0023
1) Disturbance on the ring.
2) Configuration change of the ring.
3) Hardware problem on a device.
001b0032
Access/One hub model {m}: One or more of
the concentrator’s ports have been unlocked.
Not applicable
001b0033
Access/One hub model {m}: One or more of
the concentrator’s ports have been locked.
Not applicable
001b0034
Access/One hub model {m}: One or more of
the concentrator’s ports have been auto-
segmented by the hardware because of a
fault.
001b0034
1) Too many collisions
2) Cable problem
3) Hardware problem on device
connected to the port.
001b0035
Access/One hub model {m}: One or more of
the concentrator’s ports have been
segmented by the supervisor because of a
fault.
001b0035
Operator action.
001b0036
Access/One hub model {m}: One or more of
the concentrator’s ports have been forced to
allow passive devices to enter the ring.
Not applicable
001b0037
Access/One hub model {m}: One or more of
the concentrator’s ports are no longer being
forced to allow passive devices to enter the
ring.
Not applicable
Table 9-1. Events and Alarms (Continued)
Event Message Probable Cause Message