User`s guide

The MicroMMAC-T Chassis View
2-6 Viewing Chassis Information
• Edit Device Time... and Edit Device Date..., which allow you to set the
MicroMMAC-T’s internal clock. See Setting the Device Date and Time,
page 2-23, for details
• S
ystem Group..., which allows you to manage the MicroMMAC-T via SNMP
MIB II. Refer to the Generic SNMP User’s Guide for further information.
• I
/F Summary, which lets you view statistics for the traffic processed by each
SNMP MIB II interface on your device. See Viewing I/F Summary
Information, page 2-32, for details.
• U
PS..., which brings up a window that allows you to configure an
Uninterruptable Power Supply attached to your MicroMMAC-T; see Using an
Uninterruptable Power Supply (UPS), page 2-24, for details.
• M
gmt. Station Statistics..., allows you to view network statistics for the
MicroMMAC-T’s on board ring management station. See Chapter 3, Token
Ring Statistics, for details.
• C
onfiguration..., allows you to configure the ring management station,
including setting a device name and location, setting the error report timer
delay, enabling or disabling the automatic beacon recovery process (ABRP),
and inhibiting the active monitor. You can set up a ring management station
configuration for each MicroMMAC-T-managed ring network. See
Management Station Configuration, page 2-14, for details.
• Ex
it, which closes the MicroMMAC-T Chassis View window.
The Port Status Menu
The P
ort Status menu allows you to select the status information that will be
displayed in the port text boxes in the logical Chassis View window:
• L
oad will display the portion of network load processed by each port as a
percentage of the theoretical maximum load (4 or 16 Mbits/sec) of a Token
Ring network.
• S
tatus allows you to select one of two status type displays: Admin/Link or
Admin.
• E
rrors allows you to display the percentage per port of the specific Error you
select.
• Port A
ssignment displays either the current FNB connection status or the
Network association of each port.
For more information on the port display options available via this menu, see
Selecting a Port Status View, page 2-9.