User`s guide

MIB Navigator Command Set Overview
MicroMMAC Local Management User’s Guide Page 11-3
11.2 MIB NAVIGATOR COMMAND SET OVERVIEW
The MIB Navigator command set provides the following commands:
Navigation Commands
Navigation commands allow you to access and manage the MIB for the
device running the MIB Navigator. Some of these commands also provide
user community-string information. The commands are as follows:
Other Commands
Other commands allow you to access and manage network devices
connected to the device running the MIB Navigator. The commands are as
follows:
Special Commands
Special Commands allow you to exit from the MIB Navigator. The
commands are as follows:
TIP
Use the help command for an on-line description of each MIB
navigator command. For example MIB Nav-> help branch
provides help information for the branch command.
– branch – cd -mib2 – dir
– get – ls -ctron – next
– pwd – set – su
– tree – whoami
– arp – defroute – netstat – ping
– snmpbranch – snmpget – snmpset – snmptree
– traceroute – show -reset -bridge
– done – quit – exit