User`s guide

MicroMMAC Local Management User’s Guide Page 8-1

CHAPTER 8

BRIDGE SETUP SCREEN

This chapter explains how to use the Bridge Setup screen to select a

Spanning Tree protocol and enable/disable bridge ports. If the

MicroMMAC contains a Token Ring BRIM, the lower portion of the

Bridge Setup screen contains additional ﬁelds which relate to the

operation of Token Ring devices. Figure 8-1 shows the Bridge Setup

screen.

Figure 8-1 The Bridge Setup Screen

NOTE

Token Ring bridge information does not appear in this manual

but will be included with the next revision.

BRIDGE SETUP

SPANNING TREE PROTOCOL:

BRIDGE PORT ADMIN STATUS:

BRIDGE PORT PAIR ADMIN STATUS:

BRIDGE PORT TYPE

RING NUMBER (1-FFF):

HOP COUNT LIMIT (1-E):

SINGLE ROUTE BROADCAST:

FRAME TRANSLATION:

SAVE

[IEEE 802.1]

PORT XX --> ALL PORTS

PORT XX --> PORT [YY]

[SRT]

001

[AUTO-SPAN]

[DISABLED]

[BRIDGE_PORT XX] RETURN

[ENABLED]

This section appears only if device is Token Ring or if Token Ring BRIM is installed.

090835

Event Message Line

MicroMMAC Local Management

Flash Image Version: XX.XX.XX