User`s guide

Chapter 4: System Level Screen

Page 4-8 MicroMMAC Local Management User’s Guide

4.9 COM PORT APPLICATIONS

The MicroMMAC communication ports, COM 1 and COM 2, support the

following applications:

• Cabletron Systems Local Management connections

• American Power Conversion (APC) Uninterruptible Power Supply

(UPS) management connections

• Telnet connections to a wide area network via the Serial Line Internet

Protocol (SLIP)

4.9.1 Conﬁguring the COM Ports

To conﬁgure the COM 1 and COM 2 ports, perform the following steps:

1. Use the arrow keys to highlight the COM 1 Application or the

COM 2 Application field.

2. Press SPACE or BACKSPACE to cycle through the available settings

until the operation you require appears. Table 4-1 lists the available

settings and their corresponding applications.

NOTE

Refer to the Release Notes included with the MicroMMAC to

verify which communication port applications are currently

supported.

CAUTION

Use caution not to alter the settings of the port which is

operating the current Local Management connection. This

could disconnect the Local Management terminal from the port

and end the Local Management session.