Specifications

SEHI Module Configuration View
Configuration Views SEHI
3-4 Management Module Guide
Version
The hardware revision number for this module.
The Trap Table window is where you enable and disable traps and specify the
IP address of the management workstation that receives and processes the
trap messages. (Refer to the SPMA Tools Guide for more information.)
DownLoad Application
This section of the Device Configuration View provides the following button
pertaining to the DownLoad Application for the device:
Click on this button to access the TFTP DownLoad tool. The TFTP Download
tool lets you set up the download parameters and control the download. In
addition, the TFTP Download tool can direct a device to use firmware located
on a network server instead of booting from code located on the device. (Refer
to the SPMA Tools Guide for more information.)
SEHI Module Configuration View
You can access this view from the SEHI Device Chassis View by clicking on
the module to highlight it and then selecting Module Configuration from
the Icon Subviews menu. The Module Configuration View provides
information on the configuration of the selected module and allows you to
modify some of the values.
Module Management
This section of the Module Configuration View provides the following
information on the module port configuration:
Port Count
Displays the total number of ports on this module.
Ports On
Displays the number of ports on the module with a status of ON or NLK.
Trap Table
Download