Specifications

9031012 E6 Configuration Views
3-3
SEHI Device Configuration View
The Device Configuration View is divided into a main section, and two
subsections. The main section provides the following information:
Firmware Revision
Displays the firmware revision for the device being modeled.
Hardware Revision
Displays the hardware revision for the device being modeled.
MAC Address
Displays the Physical (Ethernet) address for the device being modeled.
Chassis Table Information
This section of the Device Configuration View provides the following buttons
pertaining to the components in the stack:
Click on this button to access the Community Names tool. The Community
Names tool lets you quickly view and change community names for any MIB
component. It also allows you to enable or disable certain MIB components to
free up system resources. For more information on this tool, refer to the
Spectrum Portable Management Application (SPMA) Tools Guide.
This button opens the SEHI Slot Table, which provides information about the
types and positions of devices in the stack. You can sort, find, and update the
information contained in the table with the buttons at the top left of the table.
To activate the Sort or Find buttons, click on a column heading. Clicking on
the Sort button will sort the selected column. The Find button allows you to
search the column for a specific entry. The Update button updates the
information contained in the entire table. The SEHI Slot Table provides the
following information:
Slot
The number identifying this module’s position in the stack. The SEHI is
always in position 1.
Comp
The number identifying the type of component running in this slot. This
number corresponds to an ID number in the Component Table.
Name
The textual description identifying this module.
Type
The OID string identifying this module’s device type.
Component Table
Slot Table