Specifications

Security Configuration
Enabling a Backup Network Port
Device View SEHI
2-14 Management Module Guide
Enabling a Backup Network Port
Once you have enabled the locking feature for a specified repeater channel,
you will not be able to change your network connection unless you have placed
an additional port in a trunk state. If the channel is locked, changing the
network connection to a station port causes the port to shut down. To place an
additional port in a trunk state before locking the repeater channel, follow
these steps:
1. Highlight the port icon representing the port you want to place in
a trunk state.
2. Select Port Configuration from the Icon Subviews menu.
3. Set the Set Topological State button to “Forced_Trunk.”
The Topological State button will now read “Trunk.”
NOTE
If you are going to enable redundancy, it is not necessary to place an
additional port in a trunk state. All ports associated with the redundant
circuit will automatically be in a trunk state.