Specifications

Source Address
Device View SEHI
2-12 Management Module Guide
Source Address
Source Address Tables are used to determine which frames will be forwarded
through the SEHI from one network segment to another. This section provides
a description of the source address views used to establish a source address
table for the SEHI.
Repeater Source Address View
You can access the Repeater Source Address View by highlighting the SEHI
Logical Module STACK Button (refer to Figure 2-2), or single-clicking on the
Logical Module STACK Button with the right mouse button, and selecting
Repeater Source Address from the Icon Subviews menu. The Repeater
Source Address window will appear. For information about this view, refer to
Chapter 5, Source Address, of the SPECTRUM Portable Management
Application for the SEHI-22/24 and SEHI-32/34.
Port Source Address Opens the Port Source Address List, which is
described on on page 2-13. .
Port Security Configuration Opens the SPMA Channel A Port Security
Window. Refer to Chapter 6, Security, of the
SPECTRUM Portable Management for the SEHI-
22/24 and SEHI-32/34.
Enable/Disable Port Displays the Enable/Disable Port View, which
allows you to toggle the selected port between
enabled and disabled states.
Table 2-3. Port Icon Menu Selections (Continued)
Menu Selection Description