Specifications

Chassis Device View
Logical Port Icons
Device View SEHI
2-10 Management Module Guide
Logical Port Icons
The Logical Port Icons have specific double-click zones and a pop-up Port
Menu. To access the Port Menu, position the cursor on a logical port icon and
press the right mouse button. Menu selections are made by pressing either the
right or left mouse button. You can also access the Port Menu by single-
clicking on a logical port icon, and then selecting Icon Subviews from the
View menu. Figure 2-3 provides a breakdown of the port icon, its applicable
double-click zones, and the Port Menu selections. Table 2-3 provides
definitions of the Port Menu selections.
Figure 2-3. Port Icon Detail
Logical Port Icon Components
The Logical Port Icons consist of three areas providing information pertaining
to the ports (refer to Figure 2-3). These areas have the following functions:
Port Number
The specific number of this port. Double-clicking on this zone opens the Port
Notes facility.
Pkts 0
1
ON
Close Ctrl+c
Navigate ->
Alarms
Performance
Notes...
Utilities ->
Port Notes
Port Configuration
Port Performance
Port Frame & Error Breakdown
Port Frame Size & Protocols
Port Redundancy
Port Source Address
Port Security Configuration
Enable/Disable Port
Port Configuration View Zone/Port Status Label
Port PerformanceView Zone/Port Packet Rate Lab
e
Port Zones/Port Number