Specifications

9030372 E7 Application View
5-7
Creating the Indirect LANtern Icon
Placing the Indirect LANtern Icon into a SPECTRUM View
Location Enter the physical location of the device modeled with
the InDirect LANtern icon (i.e., building, site, room,
etc.).
Contact Enter the name of the individual responsible for
maintaining the device modeled by the InDirect
LANtern icon.
Polling Interval The time interval, in seconds, for polling any
attributes that have been flagged as “POLLED.” The
default Polling Interval value is 60 seconds.
Logging Ratio Enter the number of poll cycles that must be achieved
before the SpectroSERVER writes to the statistical
database any attributes that have been flagged as
“LOGGED.” The default value is 10.
7. After entering the InDirect LANtern icon parameter information, click
OK.
SPECTRUM creates the InDirect LANtern icon and places it into the Lost and
Found View.
Placing the Indirect LANtern Icon into a SPECTRUM View
To place an InDirect LANtern icon into a SPECTRUM view, follow these steps:
1. Select New View from the View menu.
2. Select Lost & Found from the New View menu to navigate to the Lost
and Found View.
3. Select the InDirect LANtern from the Model Name/Model Type list by
double-clicking on the entry. The InDirect LANtern icon appears.
4. Select Edit from the File menu.
5. Click on the InDirect LANtern icon to highlight it.
6. Select Cut from the Edit menu and click OK at the Are You Sure?
prompt.
7. Navigate to the SPECTRUM view where you want to place the InDirect
LANtern icon.
8. Select Edit from the File menu.
9. Select Paste from the Edit menu.
The icon representing the InDirect LANtern device appears in the center of
the window. You can move the icon to another area of the window by dragging
it with the left mouse button while still in Edit mode.