Specifications

The Indirect Lantern Icon
Application View Novell LANtern Network Monitor
5-6 Management Module Guide
3. Select Close/Update from the File menu.
4. Click OK at the Save Updated Information? prompt.
If you select Automatic, the table is updated according to the specified
update timing interval.
If you select Manual, an Update button appears on each Application View
table. To update the table, single-click on the button.
The Indirect Lantern Icon
The InDirect LANtern icon allows a network administrator to model any
device that the Novell LANtern Network Monitor or LANtern NMM is
monitoring on an Ethernet segment but is not directly available from
SPECTRUM’s currently supported model types. The device can then be
managed through SPECTRUM with the InDirect LANtern icon.
Creating the Indirect LANtern Icon
The InDirect LANtern icon is created from the LANtern Network Monitor or
LANtern NMM Application View. To create an InDirect LANtern icon, follow
these steps:
1. Select Icon Subviews from the File menu.
2. Select Application from the Icon Subviews to navigate to the Application
View for the LANtern Network Monitor or LANtern NMM.
3. Select the Station Table button to navigate to the LANtern Network
Monitor or LANtern NMM Station Table.
4. Double-click on the MAC address of the device you want to model that is
not directly supported through SPECTRUM. The LANtern Network
Monitor or LANtern NMM Station Table Information View appears.
5. Select the InDirect LANtern Model button. An Add Options Dialog Box
appears.
6. Select the IndrctLANtern model type from the Add Options Dialog Box
and click OK. A Creating IndrctLANtern Dialog Box appears.
Enter the following information:
Model Name Assign a name (preferably unique) that identifies the
device modeled with the InDirect LANtern icon.