Specifications

9030372 E7 Application View
5-5
Application View Buttons
The Update Timing Interval
Sort
You can sort columns in a table incrementally using the Sort button as
follows:
1. Single-click on the particular column label.
The Sort button appears at the top of the table.
2. Single-click on the Sort button to sort that particular column.
Ethernet (hex) device addresses are sorted in ascending order. Statistical
information is sorted in descending order.
Columns that have been sorted will remain sorted as the table is updated.
Find
You can locate a particular Ethernet device address entry in a table column
using the Find button as follows:
1. Single-click on the particular column label. The Find button appears at
the top of the table.
2. Single-click on the Find button. A text entry box appears.
3. Enter the Ethernet device address in the text entry box.
4. Click OK.
If the address is in that table column, it will be highlighted. If the address is
not in the table an “Item not found in Table” message appears.
The Update Timing Interval
You can specify the timing interval by which SPECTRUM updates tables as
follows:
1. Select Edit from the File menu.
2. Select View ‘ Timing from the Edit menu.
3. Enter the timing interval in milliseconds (1000 milliseconds = 1 second).
Updating Tables
SPECTRUM can update Application View tables automatically, or you can
update them manually, as follows:
1. Select Update from the File menu in the Application View.
2. Select either Automatic or Manual (the default is Manual).