Specifications

9030372 E7 Application View
5-3
Application View Buttons
for that statistic, and delete the station from the Destination-Source Table
list.
• Access the InDirect LANtern Model button (refer to Chapter 6 for
detailed information on the InDirect LANtern Model button).
The Destination-Source Table button accesses the Destination-Source
Table. The Destination-Source Table provides a complete cross-reference of
specific devices that are receiving transmissions and the corresponding
devices that are transmitting to these devices over the network segment.
Double-clicking on a specific device’s vendor code address brings up an
information view for that device that provides additional statistics (in bytes,
packets, and errors) for total and current transmissions received by that
device. This information view also allows you to:
• View the vendor code address as an Ethernet (hex) address.
• Bring up a rate graph, through button functions, for that statistic.
• Delete the device from the Destination-Source Table list.
The Source-Destination Table button accesses the Source-Destination
Table. The Source-Destination Table provides a complete cross-reference of
specific devices that are transmitting and the corresponding devices that are
receiving transmissions from these devices over the network segment.
Double-clicking on a specific device’s vendor code address brings up an
information view for that device that provides additional statistics (in bytes,
packets, and errors) for total and current transmissions by that device. This
information view also allows you to:
• View the vendor code address as an Ethernet (hex) address.
• Bring up a rate graph, through button functions, for that statistic.
• Delete the device from the Source-Destination Table list.
The Log Table button accesses the Log Table. The Log Table displays
detailed network statistical information on the overall operation of the
Ethernet segment the LANtern or LANtern NMM is monitoring. These
statistics are displayed over a user-defined Log Interval. The Log Interval is
specified in the Configuration View and can be changed using the Update
feature in the File menu.
Destination-Source Table
Source-Destination Table
Log Table