Specifications

9030372 E7 Event and Alarm Messages
4-3
Events and Alarms
0001000c
A LANtern network monitor {v} name {v},
has reported a broadcastsAlarm.
eAlarmType = {v}, eAlarmValue = {v},
eAlarmLowThreshold = {v},
eAlarmHighThreshold = {v}, and
eAlarmSampleTime = {v}.
adminTrapHandle = {v}.
adminDateAndTime = {v}.
0001000c
Loose cable connection.
0001000d
A LANtern network monitor {v} name {v},
has reported a collisionsAlarm.
eAlarmType = {v}, eAlarmValue = {v},
eAlarmLowThreshold = {v},
eAlarmHighThreshold = {v}, and
eAlarmSampleTime = {v}.
adminTrapHandle = {v}.
adminDateAndTime = {v}.
0001000d
Excessive hard errors detected by device.
These errors include out-of-window
collisions.
0001000e
A LANtern network monitor {v} name {v},
has reported a stationInactive. Station
MAC address is {v}. adminTrapHandle =
{v}. adminDateAndTime = {v}.
0001000e
Excessive soft errors detected by device.
The soft errors include CRC and
alignment errors, runts and giants.
0001000f
A LANtern network monitor {v} name {v},
has reported a stationActive. Station
MAC address is {v}. adminTrapHandle =
{v}. adminDateAndTime = {v}.
0001000f
Excessive traffic detected on the network.
00010011
A(n) {v} device, named {v} has been warm
started. adminPowerOffTime = {v}.
adminTrapHandle =
{v}.adminDateAndTime = {v}.
00010011
All models that this Media Segment
Model is connected to are unreachable by
the VNM. Check the status of all the
children of the Media Segment Model.
Table 4-1. Events and Alarms (Continued)