Specifications

Events and Alarms
Event and Alarm Messages Novell LANtern Network Monitor
4-2 Management Module Guide
Table 4-1. Events and Alarms
Event Message Probable Cause Message
00010007
A LANtern network monitor {v} name {v},
has reported a Cable Failure. The
eMediaStatus is {v}. adminTrapHandle =
{v}. adminDateAndTime = {v}.
00010007
The model’s Contact Status attribute has
been initialized with the value found in
the data base.
00010008
A LANtern network monitor {v} name {v}
has received an echo response to a proxy
ping from {v}. Ping duration was {v}
hundredths of a second.
adminTrapHandle = {v}.
adminDateAndTime = {v}.
00010008
Not Applicable.
00010009
A LANtern network monitor {v} name {v}
has detected a duplicate IP address {v}.
Good MAC address is {v}, bad MAC
address is {v}. adminTrapHandle = {v}.
adminDateAndTime = {v}.
00010009
Device hardware failure, Cable between
device and upstream neighbor broken,
power failure, Incorrect network address,
device firmware failure.
0001000a
A LANtern network monitor {v} name {v},
has reported a utilizationAlarm.
eAlarmType = {v}, eAlarmValue = {v},
eAlarmLowThreshold = {v},
eAlarmHighThreshold = {v}, and
eAlarmSampleTime = {v}.
adminTrapHandle = {v}.
adminDateAndTime = {v}.
0001000a
Not Applicable.
0001000b
A LANtern network monitor {v} name {v},
has reported an errorsAlarm.
eAlarmType = {v}, eAlarmValue = {v},
eAlarmLowThreshold = {v},
eAlarmHighThreshold = {v}, and
eAlarmSampleTime = {v}.
adminTrapHandle = {v}.
adminDateAndTime = {v}.
0001000b
Not Applicable.