Specifications

LANtern NMM Generic Views
Device View Novell LANtern Network Monitor
2-16 Management Module Guide
Case #2
1. Create the IRM or IRBM hub icon which contains the LANtern NMM.
2. Configure the LANtern NMM in the hub’s Device View.
3. Create the independent LANtern NMM (NA_Nov_LANMIM) icon.
If you followed the above procedure, the LANtern NMM (NA_Nov_LANMIM)
icon appears with a yellow alarm contact status in the Topology View. You can
clear the duplicate address alarm as follows:
1. Click on the stand alone LANtern NMM (NA_Nov_LANMIM) icon.
2. Select Icon Subviews from the View menu.
3. Select Diagnostic from the Icon Subviews menu to access the LANtern
NMM Diagnostic View.
4. Select Alarms from the LANtern NMM Diagnostic View. The Alarm
View displays two alarm icons for the independent LANtern NMM icon
each with a yellow alarm contact status color. The Symptom/Probable
Cause box displays DUPLICATE IP ADDRESS and DUPLICATE-
PHYSICAL ADDRESS messages respectively.
5. Select the Clear button to clear each of these alarms. The Alarm View
clears and you can now exit from this view.
LANtern NMM Generic Views
To access the LANtern NMM Configuration, Diagnostic, Application, and
Performance Views while in a hub Device View, do the following:
1. Single click on the LANtern NMM physical or logical representation to
highlight it.
2. Select Icon Subviews from the View menu.
3. Select the generic view of interest.
To access the LANtern NMM Port Performance View while in a hub Device
View, do the following:
NOTE
The LANtern NMM Configuration, Diagnostic, Application, and Performance
Views can also be accessed from the independent LANtern NMM icon
(NA_Nov_LANMIM).