Specifications

9030372 E7 Device View
2-5
IRM2 or IRBM Hub Device Views
Two buttons are available from the MMAC Device Panel to change the
statistical selections, as follows:
The Logical Gauges button accesses a menu that allows you to select the
statistic represented by the horizontal bar gauges for the overall board or
individual port on a MIM in a logical MIM representation. The statistical
selections are as follows:
Frames
Indicates the amount of frames received or transmitted by the board or port.
Bytes
Indicates the amount of bytes received or transmitted by the board or port.
Total_Colls
Indicates the total amount of collisions detected by the board or port.
Recv_Colls
Indicates the amount of collisions received by the board or port.
Trans_Colls
Indicates the amount of collisions generated by the board or port during
transmission.
Total_Errors
Indicates the amount of errors detected by the board or port.
Align_Errors
Indicates the amount of misaligned packets detected by the board or port.
CRC_Errors
Indicates the amount of packets received by the board or port with bad Cyclic
Redundancy Checks (CRCs).
Runts
Indicates the amount of runt packets received by the board or port. A runt
packet is one byte less than the standard Ethernet frame of 64 bytes not
including the preamble.
Table 2-1. Port Status Colors
Status Color Code
NLNK (No Link) Yellow
ON Green
OFF Blue
SEG (Segmented) Red
Logical Gauges