Specifications

Configuring the LANtern NMM in an IRM or IRBM
Device View Novell LANtern Network Monitor
2-2 Management Module Guide
2. The LANtern NMM model type designation contained in the CsDevice.pib
file points to the MIM_LANtern.D3P (<CsIibpath>) perspective file, which
contains:
• The image (.csi) filename for the LANtern NMM. The .csi file is located in
a directory defined by your imagepath (<CsImagepath>).
• The position coordinates for each LED on the LANtern NMM.
3. SPECTRUM’s intelligence (using the HASPART relation) causes the
Device View to read the model type designation and model type handle for
each LANtern NMM installed in the hub chassis.
4. The Device View creates an icon manager that controls each NMM model
associated with the hub chassis model.
5. The Device View periodically polls the hub model in the SpectroSERVER
database to determine if any configuration changes have occurred. If a
configuration change has occurred, the Device View changes
correspondingly to match the model in the SpectroSERVER database.
Configuring the LANtern NMM in an IRM or
IRBM
To receive LANtern NMM gauge and port information in the IRM or IRBM’s
Device View logical representation and for the LANtern NMM LEDs to appear
“live” in the IRM or IRBM’s Device View physical representation, you must
assign an IP address to the LANtern NMM installed in the hub chassis as
follows:
1. Move the mouse pointer onto the LANtern NMM. Single click the left
mouse button to highlight the LANtern NMM.
2. Select Icon Subviews from the View menu.
3. Select MIM Configuration View from the Icon Subviews menu to access
the LANtern NMM Configuration View.
4. Select Update from the File menu in the LANtern NMM Configuration
View.
NOTE
This path (<Perspective Path>/CsDevice.pib) is set in your .Xdefaults or app-
defaults/spectrum files.