Specifications

AR System Gateway
AR and AR System Gateway Compatibility
SPECTRUM Software Release Notes Page 53
AR System and then use the reconfig tool to change the defaults. See
the SPECTRUM AR System Gateway User’s Guide for instructions
on how to use the reconfig tool.
If you change the AR System Server that you plan to run against, be sure
to modify the /etc/ar (or on NT, the ar file in the AR System Gateway
folder, that is, $SPECROOT\ars_gateway\ar) with the new AR System
Server name.
AR and AR System Gateway Compatibility
SPECTRUM AR System Gateway 6.0.3 is a Remedy AR System 4.5 client,
and is fully interoperable with Remedy AR System 4.5 servers.
Known ARS Gateway Anomalies in
SPECTRUM 6.0.3
Problem 1: On Windows NT, when you launch AR System Gateway, a
bash shell launches and starts to scroll continuous error messages. If you
type CTRL-C in the shell, the Policy Administrator crashes and you receive
a Dr. Watson error message.
Solution: This problem will be corrected in a future release of
SPECTRUM.
Problem 2: When you run SANM-enabled AR System Gateway on the
Solaris platform with the -ts option set less than the number of models
you are filtering (e.g.: if you have 1000 models, you should not set the
option -ts to be 500), the swap space will eventually be used up causing
a SpectroSERVER segmentation fault.
Solution: When setting up the trace file, be careful about its size in
relation to the number of models specified in the policy filter. To be safe,
accept the default size of 10000.