Specifications

SPECTRUM Software Release Notes Page 43
Enterprise Alarm Manager
Alarm Manager and Enterprise Alarm Manager provide the user with a dynamic view
of SpectroSERVER alarms. If your network is modeled using a distributed
SpectroSERVER, you may have several landscape icons in SpectroGRAPH, each
representing its own SpectroSERVER. You can opt to view all or some of these
landscapes in EAM.
Corrected Alarm Manager Anomalies in
SPECTRUM 6.0.3
1 You are no longer taken back to the main Enterprise Alarm Manager
View (on the Solaris platform) after creating a pingable in a topology
view, you enter a model name in the Filter area, select the model
name table, and then type in the model name entry.
2 On the Solaris platform, when you create a duplicate model, open the
Alarm Manager from the duplicate model, open the popup view
navigator menu off the alarm model, then select Device -> Chassis,
you no longer receive an error message.
Known Alarm Manager Anomalies in
SPECTRUM 6.0.3
Problem 1: Newly created Alarm Descriptions in SpectroWATCH will not
display in the Alarm Manager if the Alarm Manager was running at the
time the watch and its custom Alarm Description was created. The alarm
itself is displayed but without the custom new Alarm Description.
Solution: Exit then restart the Alarm Manager. The new view will be
updated with your custom alarm description. This problem will be
corrected in a future release of SPECTRUM.