Specifications

Configuration Views VRRP Configuration View
SPECTRUM Enterprise Manager Page 43 SmartSwitchRouter
Auth Key
The Authentication Key. This field is set according
to the value of Auth Type (“simpleTextPassword”
or “ipAuthenticationHeader”). If the length of the
value is less than 16 octets, the agent will left
adjust and zero fill to 16 octets. The value of this
field is the same for a given ifIndex.
When read, this value always returns an Octet
String of length zero.
Adv Intvl
The time interval, in seconds, between sending
advertisement messages. Only the master router
sends VRRP advertisements. The default is 1
second.
Preempt Mode
Controls whether a higher priority virtual router
will preempt a lower priority master. Default is
True.
Up Time
This is the value of the “sysUpTime” field when
this virtual router (i.e., the State) transitioned out
of “initialized.”
Protocol
The particular protocol being controlled by this
Virtual Router. Valid values are: ip, bridge,
decnet, and other.
Status
The row status variable, used in accordance to
installation and removal conventions for
conceptual rows.
The state that this field transitions to when set is
based on a determination of whether the read-
write fields in the row have been correctly
initialized for virtual router operation. A row in
which not all of the fields are correctly set is
considered ‘incomplete’.
The row status of a mandatory active row in the
vrrpOperTable is also constrained by the
operational state of the corresponding virtual
router. Prior to setting this field from active to a
different value, Admin State must be set to
“down”, and the State field be transitioned to
“initialize.”
The row status column has six defined values, as
defined in Table 12: