Specifications

Configuration Views SmartSwitch Router Configuration View
SPECTRUM Enterprise Manager Page 36 SmartSwitchRouter
flows that originate and terminate in the same
subnet are accounted for by L2Learned.
L3Aged
The total number of L3 flows that have been
removed from the L3 hardware flow tables across
all modules by the L3 aging task. This number
may increase quickly if routing protocols are not
stable. Removal or insertion of routes into the
forwarding table will cause premature aging of
flows. Flows are normally aged/removed from the
hardware when there are no more packets being
sent for a defined time period. This counter is
cumulative from the time the system started.
L2Learned
The number of Layer 2 (L2) flows or addresses
learned. The intended result here is to see how
many stations attempt to establish switched
communication through the SSR.
L2Aged
The total number of L2 addresses or flows aged
out. Hosts that end switched communication
through the SSR are aged out every 15 seconds.
NIA-rcvd
The total number of packets received by the NIA
chip. This is useful in gauging how many packets
are forwarded to the CPU for processing.
NIA-txd
The total number of packets transmitted by the
NIA chip. This is useful in seeing how much the
CPU is communicating directory with
management stations and other routers.
SmartSwitch Router
Configuration View
Access: From the Icon Subviews menu for the Device
icon, select Configuration.
Contact Status
The contact status of the model.
Number of Interfaces
The number of interfaces on the model.
Clicking this button opens the Redundancy and
Model Reconfiguration Options View (Page 37).
Clicking this button opens the Interface Address
Translation Table (Page 39).
Redundancy and Model
Reconfiguration Options
IP IF Address Translation