Specifications

Device Views Chassis Device View
SPECTRUM Enterprise Manager Page 14 SmartSwitchRouter
Interface Status View
Access: From the Icon Subviews menu for the Interface
icon in the Interface Device view, select IF Status.
The Interface Status view provides the following
information on the status of the interface:
Operational Status
Displays the current operational state of the
interface is displayed (Up, Down, Testing, or
Unknown).
Allows you to select the desired operational state
of the interface (On, Off, or Testing).
Secondary Address Panel
Access: From the Icon Subviews menu for the Interface
icon in the Interface Device view, select Secondary
Address Panel.
This panel provides a table of IP addresses and
masks obtained from the Address Translation
Table within the device’s firmware. You can
change the current address displayed in the IP
Address field by selecting an entry from the table
in this panel and clicking the Update button.
Chassis Device View
Access: From the Icon Subviews menu for the Device
icon, select Device > Chassis.
This view (Figure 5) shows an example of a
Chassis Device View, which displays the modules
contained within the chassis, their location, and
ports. The ports are represented by dynamic icons
that display operational status.
Secondary
Address Panel
Secondary Address Panel displays the
current IP address for this interface.
IF Thresholds Interface Threshold view, which lets
you set the on/off alarm thresholds
for load, packet rate, error rate, and
% discarded for the interface.
Model
Information
Model Information View (Page 46) for
this interface.
Administrative Status
Table 6: Interface Label Icon Subviews Menu