USER'S GUIDE HSIM-W6

Chapter 6: HSIM-W6 Configuration with QuickSET

78 HSIM-W6 User’s Guide

Wide Area DDS Conﬁguration Window

The Wide Area DDS conﬁguration window shown in Figure 26 displays after clicking on the

Next>> button in either the HSIM configuration window or the Wide Area (Frame Relay or PPP)

conﬁguration window, depending on whether you have installed one or two WPIMs in the

HSIM-W6, and the order that you are conﬁguring them.

This section explains how to conﬁgure the HSIM-W6 Wide Area DDS port using QuickSET.

Figure 26 Wide Area DDS Conﬁguration Window

NOTE

The service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for the

following ﬁelds. Consult the service provider for the correct settings.