USER'S GUIDE HSIM-W6

Chapter 6: HSIM-W6 Configuration with QuickSET

72 HSIM-W6 User’s Guide

Once the Wide Area E1 conﬁguration is complete, click on Next>> in the Wide Area E1

conﬁguration window and proceed to Wide Area Frame Relay Time Slot Configuration

Window if you are using the Frame Relay Protocol or Wide Area PPP Time Slot Configuration

Window if you are using the PPP Protocol.

Wide Area DI Conﬁguration Window

The Wide Area DI conﬁguration window shown in Figure 24 displays after clicking on the

Next>> button in either the HSIM configuration window or the Wide Area (Frame Relay or PPP)

conﬁguration window, depending on whether you have installed one or two WPIMs in the

HSIM-W6, and the order that you are conﬁguring them.

This section explains how to conﬁgure the HSIM-W6 DI WAN port using QuickSET.

Figure 24 Wide Area DI Conﬁguration Window