USER'S GUIDE HSIM-W6

Chapter 7: General Configuration Using Local Management

HSIM-W6 User’s Guide 153

IPX Conﬁguration Screen

The IPX Conﬁguration screen enables you to access the IPX General Conﬁg, IPX SAP, and IPX

RIP screens to conﬁgure the HSIM-W6 for IPX Routing and enable RIP routing or SAP routing on

the HSIM-W6.

Access the IPX Conﬁguration screen, shown in Figure 63, by using the arrow keys to highlight the

IPX option on the Router Setup screen and then pressing ENTER. The IPX Configuration screen

displays.

Figure 63 IPX Conﬁguration Screen

IPX Conﬁguration Fields

The following list describes each of the IPX Conﬁguration screen ﬁelds.

IPX General Conﬁg — Use this ﬁeld to access the IPX General Conﬁg screen and conﬁgure the

HSIM-W6 for IP routing.

IPX CONFIGURATION

IPX General Config

IPX SAP

RETURN

IPX RIP

HSIM-W6 Local Management Flash Image Version XX.XX.XX