Specifications

Serial I/f Application Configuration
Application Views 3Com LinkSwitch 1000/3000
5-42 Management Module Guide
valid. When this field is Invalid, either not all of the information has been
provided, or the resilient pair rules are no longer valid because of a change in
the configuration of the device such a moving a card.
Mod State
Displays the Modification State of the resilient pair. You must set the Under
Mod field in the Mrm Resilience Table Entry view to a value of Under-Mod
before changing the configuration of a pair. The changes are not applied until
this field shows the value Stable.
Pair Action
This field is used to change the state of the pair. Setting a value of Create
configures the pair using the definitions in the entry. Setting Delete removes
the entry from the table and terminates operation of resilience on this pair of
ports. The setting TogglePort swaps the currently active port with the standby
one if and only if the standby port has a status of OK.
Pair Enable
This filed Enables or Disables both ports in the resilient pair.
Mrm Resilience Standby Table
The Mrm Resilience Standby Table is accessed by clicking the Standby Map
Table button in the Mrm Resilience view. This is a read-only table which
provides shortcut information to allow the translation of a port number to a
corresponding main port number. This number can then be used to access the
Mrm Resilience Table. Each resilient pair has two entries in the table, one for
the main port and one for the standby.
Repeater
Displays the repeater on which the port is located.
Slot
Displays the slot number on which the port is located.
Port
Displays the port number of the port.
Type
Displays the type of the port. Possible values are Main and Standby.
Main Slot
Displays the slot number of the main port in the pair.
Main Port
Displays the port number of the main port in the pair.