Specifications

9032294 E2 Application Views
5-37
Serial I/f Application Configuration
Port Security
Admin
Allows you to enable or disable a port. Once disabled, a port must be explicitly
enabled to restore operation. A port which is already set to be disabled when
power is lost or when a reset is performed will remain disabled when normal
operation resumes. This field takes precedence over Auto-Partition and
functionally operates between the auto-partition mechanism and the AUI/
PMA.
In effect, when a port is disabled, the Auto Partition State is frozen until the
port is next enabled. When the port becomes enabled, the Auto Partition State
is set to Not Auto Partitioned, regardless of its pre-disabling state.
Part Event
This field displays whether a trap should be sent if the port partition changes
state.
Link Event
This field displays whether a trap should be sent if the link state changes.
Link Pulse
This field determines if link pulse generating and monitoring is Enabled for a
10Base-T port or not. Enabled is the default. For other ports, this field should
have a value of NotApplicable.
DUD Action
The action taken when an unauthorized device is detected. Possible values
are: NoAction, Notify, Disconnect, and Unknown.
EST Filter
Displays whether address information is extracted from packets received on a
port and forwarded to the End Station database and, if it is, what address
information is extracted.
It is recommended that this attribute be disabled for inter-repeater links to
prevent the database being filled with remote information. To disable this
feature for all address types set this to ForwardNone.
Port Security
This application provides access to the the Port Security View. The model for
this application is 3ComSecPortApp.
Port Security View
This view contains the Port Security Table, the Port Address Table, and an
Add Entry button.