Specifications

Serial I/f Application Configuration
Multi Repeater
Application Views 3Com LinkSwitch 1000/3000
5-36 Management Module Guide
ID
Displays the repeater for which this entry contains information.
Slot
Displays the card slot on which this port resides.
Index
Displays the index number for this service.
Interface
Displays the type of electrical interface made available for this port. It does
not specify what the actual medium to the End Station is.
Connector
Displays the type of physical connector on the port. This is not the media. For
example, UTP may be connected to the port with either an RJ-45 or a Telco
connector.
AutoPartitioned
Displays whether the port is currently partitioned by the repeater’s auto-
partition protection. For more information on port partitioning, refer to
Section 9 in the IEEE 802.3 Standard.
Link
Displays whether there is a signal on this port. This field applies equally to
fiber and copper connections and is correct irrespective of the Admin state in
the Port Config Table or the AutoPartitioned field.
Boot
Displays the default state for this repeater upon a reset. Possible values are
Enabled and Disabled.
Security
Displays whether security is an available feature on this port. Only ports with
security enabled have an entry in the Repeater Security Table. Security is not
implemented in the current release.
Module
Displays whether the port is a modular port or not.
Function
Displays the function of the port. Possible values are: Unknown, Repeater, and
Bridge.
Port Config Table
This table includes the following fields:
ID/Slot/Index
Same as in the Port Info Table.