Specifications

Serial I/f Application Configuration
Multi Repeater
Application Views 3Com LinkSwitch 1000/3000
5-34 Management Module Guide
Stop Bits
Displays the number of stop bits, either 1, 1.5, or 2, if AutoConfig is disabled.
You can update this field using the V.24 Configuration Table view.
Parity
Displays the parity option to use if AutoConfig is disabled. You can update this
field using the V.24 Configuration Table view.
DSR Cont
This field only applies to Local connection types. It displays whether DSR
needs to be asserted for a local connection to be made and if the connection
needs to be released if the DSR is seen deasserted. You can update this field
using the V.24 Configuration Table view.
DCD Cont
This field only applies to Local connection types. It displays whether DCD
needs to be asserted for a local connection to be made and if the connection
needs to be released if the DCD is seen deasserted. You can update this field
using the V.24 Configuration Table view.
Flow Cont
Displays the flow control protocol to be used. You can update this field using
the V.24 Configuration Table view.
Update
Set this field to Change using the V.24 Configuration Table Entry view to force
the port to update its parameters.
Multi Repeater
This application provides the Multi Repeater Configuration view, from which
you can access both the Multi Repeater Port Configuration view and the Multi
Repeater Card Entry view. The model type for this application is
3CommultiApp2.
Multi Repeater Configuration View
This view contains the Card Table. Double-clicking the ID or Slot of an entry
displays the Multi Repeater Port Configuration view described in this section.
Double-clicking one of the other fields displays the Multi Repeater Card Entry
view for that entry, which allows you to set the Test field.
ID
Displays the Service ID. It identifies one of the repeaters within the chassis as
the target of a request.
Slot
Displays the slot occupied by the card.