Specifications

9032294 E2 Application Views
5-33
Serial I/f Application Configuration
Serial I/f Application Configuration
The Serial Interface application supports the V.24 Port Config view, and serves
as the anchor point for the Multi Repeater application, the Port Security
application, and the Mrm Resilience application. The model type for this
application is 3ComserIfApp.
V.24 Port Config View
This view contains the V.24 Port Config Table and, beneath it, the Slip Port
field.
Slip Port
The serial port which SLIP can use to send and receive packets. If this field
has a value of 0xffff, then SLIP can not send or receive packets. You can
update this field.
V.24 Port Config Table
This table describes the configuration parameters for the V.24 ports. Double-
clicking an entry accesses the V.24 Configuration Table Entry view in which
you can update several fields for the selected entry.
Id
Displays the Port ID and index for this table.
Conn
Displays whether the port is connected Local to a terminal or terminal
emulator, or Remote to a modem. If it is Local no interface signals need to be
asserted unless by other management options. If it is Remote, at least DSR is
required. You can update this field using the V.24 Configuration Table view.
Auto Con
Displays Enabled if the next four parameter values are determined
automatically from an initial character sequence entered by the user. Displays
Disabled if the parameter values are entered explicitly.
Speed
Displays the receive and transmit speed of the port if AutoConfig is disabled.
Different speeds for transmit and receive are not possible. You can update this
field using the V.24 Configuration Table view.
Char Size
Displays the character size, either 7 or 8, if AutoConfig is disabled. You can
update this field using the V.24 Configuration Table view.