Specifications

9032294 E2 Application Views
5-31
Chassis Configuration Application
Facility Table View
The table displays an Id and an Index value to distinguish between multiple
potential addresses for a service.
This table includes entries for the management card itself. The management
card entries contain the physical address of the currently active MAC and the
IP address of the SNMP stack.
Id
Displays the id of the service for which this row provides information.
Index
Displays an Index number used to distinguish between multiple addresses for
a service in the chassis.
Addr Type
Displays the type for each of the services in the chassis. Note that
ieee8023Address and ieee8025Address types differ from each other in the bit
ordering of the physical address. Possible values are ieee8023address,
ieee8025address, ipaddress, slipaddress.
MAC Address
The MAC address of the service.
IP Address
The IP address of the service.
Facility Table View
This view contains the Facility Table.
The chassis can simultaneously maintain a number of different sub-networks,
such as independent repeaters, or a number of Token Rings. These
fundamental services are referred to as facilities. Each card in the chassis can
either provide or be connected to one or more of these facilities. This table
provides a means of determining and changing the facilities used by a
particular card.
The number of entries per card depends on the type of card. For example an
802.3 repeater card can be expected to have a single entry while an 'n' port
bridge would have 'n'. The number of entries for a particular card can not be
changed.
Slot
Displays the card on which a service resides.
Index
Each card may have multiple entries in the Facility Table. This a number
uniquely identifying each of these entries.
It is a convention that the value of this index maps as closely as possible to the
physical configuration of the entity represented. For example if a bridge has