Specifications

Chassis Configuration Application
Application Views 3Com LinkSwitch 1000/3000
5-26 Management Module Guide
Accesses the Physical Limits View.
Accesses the Chassis Service View.
Accesses the Service Address View.
Accesses the Facility Table View.
Chassis Configuration Table view
This view contains the Chassis Configuration Table, which displays the
current physical configuration of the chassis. A chassis is defined as
containing a number of physical entities, each entity having some position
that distinguishes it from other potentially similar entities. Examples of
entities are cards, power supplies etc.
Note that this table only contains information on a location that is currently
occupied by some entity.
Double-click an entry to access the Chassis Configuration Entry view
containing information on one entry.
Type
A chassis contains a number of physical entities such as power supplies and
cards, each residing at a specific location within the chassis. These locations
can be specialised to different purposes. Currently there are four types of
location defined: Module, Power-supply, Fan, and Backplane
This list can be extended for a particular application:
• Module: This is a generic category. The information displayed in this field
is often the purpose of the device. For this device the module type is
Stackable.
• Power-supply: This location can only hold a power supply.
• Fan: This location can only hold a fan.
• Backplane: This location can only hold a backplane.
Limits Table
Service Table
Address Table
Facility Table