Specifications

LinkSwitch 1000 Application
LinkSwitch 1000 Database view
Application Views 3Com LinkSwitch 1000/3000
5-24 Management Module Guide
Database Size
Displays the number of permanent and non-permanent addresses currently
held in the database on a LinkSwitch1000 hub.
Perm Database Size
Displays the number of permanent addresses currently held in the database
on a LinkSwitch1000 hub.
Database Table
Double-click an entry in this table to change configurations. This table
contains the following fields:
Unit
A LinkSwitch stack may contain up to four units. This number uniquely
identifies the unit on which the address was learned.
Port
A LinkSwitch unit can contain up to 26 ports. This number uniquely identifies
the port on which the address was learned.
Index
Multiple addresses can be learned on a single port. This number uniquely
identifies one address on a port.
Address
The physical address of the station which has been learned on a port of a
LinkSwitch stack.
Address Status
Displays the status of the address. Possible values are Non Permanent,
Permanent, and Delete. Non Permanent addresses will eventually be removed
from the database if they are not the subject of lookup requests. Permanent
addresses remain in the database until the user deletes them. The user can
remove an address from the database by setting this field to delete.
Address Priority
Displays if the address has been designated a high priority address, in which
case packets from that address will get priority through the switch, or if it is
normal priority.
NOTE
This column will not be present if HP Type in the LinkSwitch 1000 Unit
Configuration view is set to No High Priority.