Specifications

Hub Application
Local SNMP
Application Views 3Com LinkSwitch 1000/3000
5-12 Management Module Guide
Category
Displays the 32-bit mask indicating which categories of traps in which the
Destination is interested. Table 5-6 shows possible values and descriptions.
Throttle
The maximum rate at which the Destination is willing to receive traps in
milliseconds. You can update this field.
This is specified as the minimum interval between traps. A value of 2000 will
limit the traps to one every 2 seconds. A value of 0 indicates that no trap
throttling is required.
Row Status
The Status for this entry. Table 5-7 shows possible values and descriptions.
Table 5-6. SNMP Trap Categories
Value Description
‘00000001’h High priority configuration traps
‘00000002’h Low priority configuration traps
‘00000004’h High priority security traps
‘00000008’h Low priority security traps
‘00000010’h Alarms and polling traps
‘00000020’h Regular heartbeat traps
‘00000040’h End Station Table traps
‘00000080’h Reserved
‘00000100’h Physical entity traps
‘00000200’h Facility traps
‘00000400’h Service related traps
0xFFFFFFFF Enables all traps
Table 5-7. SNMP Trap Row Status Values
Value Description
Active This status can be displayed and set
NotinService This status can be displayed and set
NotReady This status can be displayed but not set
Create&Go Used only when adding entries
Create&Wait Used only when adding entries
Destroy Deletes the entry