Specifications

9032294 E2 Application Views
5-5
Hub Application
Hub Application
This application provides access to hub functionality for this device. The
model type for this application is 3ComHubApp. Table 5-1 describes each of
the application-specific Icon Subviews menu selections for the Hub
application.
The following applications are subordinate to the Hub application and have
the same Icon Subviews menu selections. Table 5-2 presents these selections.
• Fault Table
• Gauges Group
• Local SNMP
• Poll Table
• Power Supply Configuration
• System Loader
Fault Table
This application provides access to a table containing information on the
faults detected by this device. The model type for this application is
3ComfaultApp.
Table 5-1. Hub Application-Specific Icon Subviews Menu Selections
Menu Selection Description
Configuration Described under Device Configuration View in Chapter 3,
Configuration Views
EndStation Described under End Station View in Chapter 3,
Configuration Views
Security Described under Security View in Chapter 3, Configuration
Views
Model Information Opens the Model Information view described in the
SPECTRUM Views Reference.
Table 5-2. Hub Sub-Application Icon Subviews Menu Selections
Menu Selection Description
Configuration Accesses the view described in the relevant section below.
Model Information Opens the Model Information view described in the
SPECTRUM Views Reference.