Specifications

Security View
EndStation Port Access Table view
Configuration Views 3Com LinkSwitch 1000/3000
3-8 Management Module Guide
MAC Address
The MAC address, if relevant.
Slot
Displays the number of the unit on which this address was learned.
Port
Displays the port number within the unit on which this address was learned.
EndStation Port Access Table view
This table displays only those entries in the database with the Modified Flag
set. Any entries that have changed since last viewed by a manager will be
displayed in this view. This view is similar to the EndStation Modified Table
view, but is sorted by Slot andPort rather than Address Type.
For information about individual fields see the EndStation Table view,
described on Page 3-7.
Security View
To access the Security view do the following:
1. Highlight the device icon.
2. From the Icon Subviews menu, select Security.
This view provides the following information and fields:
Security Enable Table
This table displays permission for access to the device from each of its
interfaces. Users are assigned security levels in the Security Users Table view.
Double-clicking an entry in this table displays the Security Enable Table
Entry view.
Security Level
Displays the security level for the table. This field also acts as the index for the
table. Possible values are Monitor, SecureMonitor, Manager, Specialist, and
Security.
The following fields have possible values of Enable, Disable,
PermanentlyEnabled, and PermanantlyDisabled. You can change these fields
from the Security Enable Table Entry view.