Specifications

End Station View
ASCII Agent Information View
Configuration Views 3Com LinkSwitch 1000/3000
3-6 Management Module Guide
ASCII Agent Information View
This view displays information about who is logged in to the device, whether
they are currently active, and the time they logged in. These fields are
updated by an ASCII agent such as a local terminal or a remote login.
This view displays the following fields:
User Name Last Attempted Login
Displays the ASCII string entered as the user name when last attempting to
login.
Login Status
Displays the status of the last attempted login.
Time Attempted Login
Displays the time of the last login attempt in hundredths of a second since the
system was last restarted.
End Station View
The End Station database maintains information relating end station address
information to device port for 802.3 repeater-type devices. This view allows
you to view and modify the address information for the device.
To access the End Station view do the following:
1. Highlight the device icon.
2. From the Icon Subviews menu, select Endstation Config.
This view provides the following information and fields:
Flush Database
Allows you to empty the database.
Database State
Displays NoChange until a change is made to the End Station database. It
then displays Modified until reset.
NOTE
The End Station database is global and applies across all devices in the
stack. There is no distinction between units on one repeater and those on
another. Given a unit number, the manager can read the configuration values
to determine the actual repeater association.