Specifications

Syn3FDDISMT Application
SynOptics FDDI SMT Parameters View
Application View SynOptics Series 3000 Hub
5-4 Management Module Guide
Non-Master Count
The number of Non Master Ports (A, B, or S ports).
Master Count
The number of master ports in a node. If the node is a concentrator, the value
is zero.
Set Count
Indicates that a set operation on the mib has occured.
Last Set Station Id
Identifies the last station that was set.
Time Stamp
Displays the value of time stamp.
Transition Time Stamp
Displays the value of transition time stamp.
SynOptics FDDI SMT Parameters View
This view displays the following SMT information:
Intelligent Insertion Policy
The intelligent insertion policy used by the SMT on this concentrator.
Intelligent Insertion Mask
The intelligent insertion policy Bit Mask.
Station Action
This value can be set as follows:
• Other - badvalue error
• Connect - generates a connect signal to ECM to begin a connection
sequence
• Disconnect - generates a disconnect signal to ECM and sets the disconnect
flag
• Path Test - initiates a path test
• Self Test - initiates a station test
• Disable A - disables port A if it is in the peer mode
• Disable B - disables port B if it is in the peer mode
• Disable M - disables all M ports
Notify Timer
The timer used in the neighbor notification protocol (in seconds).
Trace-Max Expiration
Indicates thar a bypass is present.
User Data
Thirty-two octets of user defined information.