Specifications

9030920 E6 Configuration Views
3-31
SynOptics Ethernet Local Bridge Configuration View
SynOptics Ethernet Local Bridge Configuration
View
The SynOptics Ethernet Local Bridge Configuration view contains more
detailed network configuration information for the SynOptics 332xS Bridge.
This view provides the following information:
Bridge ID
Bridge MAC address.
Bridge Instances
Bridge instances present.
Bridge Mode
This field provides a button that allows you to select the current operating
mode of bridge from Forward, Relay, Security or Listen.
Filter Matches
This field provides a button that allows you to select the action taken on the
Range Filter Table match from Pass, Discard, or Disable.
Topology BPDU Timer
The seconds between generation of SynOptics Topology BPDUs.
Hold Time
The time before unacknowledge BPDUs will be resent.
Next Warm Start
Default Bridge Mode
This field provides a button that allows you to select the default operating
mode of the bridge upon power up or restart. Options are Forward, Relay,
Security or Listen.
Default Topology BPDU Timer
NVRAM value for the seconds between generation of SynOptics Topology
BPDUs.
Default Hold Time
The values stored in non-volatile storage for the time before unacknowledge
BPDUs will be resent.
Write Configuration Settings to NVRAM
This field provides a button that allows you to copy RAM parameter values to
NVRAM.
Clicking on this button opens the SynOptics Ethernet Local Bridge Range
Table described below.
Range Table
Spanning Tree Configuration